Compare rolled lead sheet in Codes 3–8, choose the required width and roll length, and move directly into the Lead Lads Shop for secure online checkout and UK delivery. For faster specification, use our shoppable lead flashing chart to select suitable lead sheet for flashings, soakers, abutments, valleys and roofing details.
Rolled lead sheet is available in Codes 3–8, with each code representing a different nominal thickness and weight. Code 3 and Code 4 are commonly associated with smaller flashing and soaker details, while heavier codes may be specified for valleys, gutters, bays and larger fully supported roofing areas.
The correct lead code should be selected with reference to the intended application, sheet dimensions, exposure, support, bay size and allowance for thermal movement. Our rolled lead products are manufactured to BS EN 12588, while design and installation should follow the relevant principles of BS 6915 and recognised industry guidance.
Complete the detail with compatible fixings, suitable separating underlay and patination oil where required. Correct material selection helps reduce the risk of fatigue, staining, corrosion and premature failure.
The Lead Lads Shop provides a direct route to buy lead flashing online by code, width and roll length. Use the shoppable lead flashing chart to compare common roll sizes for chimney flashings, stepped flashings, cover flashings, abutments, soakers and general roofing work.
Once you have selected the required lead code and dimensions, you can proceed directly to secure checkout. This creates a faster route from specification to purchase while keeping technical guidance, material selection and product ordering connected.
Choose rolled lead sheet, lead flashing sizes, specialist fixings, separating underlays, welding products and accessories for professional leadwork projects.
Codes 3–8 in popular widths and roll lengths for flashings, valleys, gutters and specialist roofing details.
Choose the required lead code, width and length for flashings, soakers, abutments and chimney details.
Hall clips, restraint strips, copper nails, stainless-steel fixings, clips and washers for professional installation.
Separating membranes and underlays that support movement and protect fully supported rolled lead sheet.
Copper roof strips, welding rods, equipment and consumables intended for trained and competent professional use.
Patination oil, cleaners, primers, sealants and ancillary products for a clean and professional finish.
Traditional sand-cast lead sheet for conservation, historic buildings and specialist architectural applications. Contact us with the required dimensions and project details to request a quotation.
Request a Sand-Cast Lead QuoteBefore ordering, identify the required lead code, roll width and length, then confirm that the selected product is appropriate for the intended flashing, valley, gutter or roofing detail.
The lead code identifies the nominal sheet thickness and weight per square metre. Selection depends on the application, dimensions, exposure, support and movement requirements.
Choose a width that provides sufficient cover, laps and upstands without unnecessary material waste. Select a roll length that suits the detail and can be handled safely.
Complete the order with compatible fixings, clips, separating underlay and patination oil where these are required by the specification.
Rolled lead sheet used for building applications should conform to BS EN 12588, which specifies relevant material composition, dimensions and mechanical properties. This provides consistency across sheet thickness, weight and performance.
The material standard does not determine the suitability of a particular code or roll size for every application. Design and installation must separately consider bay sizes, thermal movement, falls, laps, drips, fixings, support and interfaces with surrounding construction.
For further technical information, see our guide to BS 6915 and proper leadwork.
Browse detailed product guides covering rolled lead sheet, flashing sizes, fixings, underlays, welding equipment, accessories and sand-cast lead.
You can buy rolled lead sheet directly through the Lead Lads Shop. Products can be selected by lead code, width and roll length before proceeding to secure checkout and UK delivery.
Rolled lead sheet is commonly supplied in Codes 3–8. Each code represents a different nominal thickness and weight per square metre. Availability varies by width, roll length and stock position.
Code 4 lead is thicker and heavier than Code 3. Code 3 is often used for smaller soakers and weathering details, while Code 4 is widely used for flashings and other roofing applications. Final selection depends on the dimensions, support, exposure and design of the detail.
The required width depends on the cover, lap, upstand, chase depth and geometry of the detail. Use the shoppable lead flashing chart to compare common widths, but check the specification and relevant installation guidance before ordering.
Roll weight depends on the lead code, sheet width and roll length. Heavier codes and wider or longer rolls increase the total weight. Individual product pages should state the relevant product weight or provide enough information to calculate it.
Rolled lead prices are commonly influenced by the total material weight and prevailing market conditions. The online shop displays the current selling price for each available code and roll size.
The Lead Lads Shop provides UK delivery subject to product size, weight, destination and carrier availability. Delivery options and applicable charges are shown during the ordering process.
Our standard rolled lead sheet products are supplied as material manufactured to BS EN 12588. Check the individual product description or contact the shop where confirmation is required for a particular order or specification.
Sand-cast lead may be available by quotation for heritage, conservation and specialist architectural projects. Requirements should be discussed before ordering because sheet dimensions, appearance and production lead times can vary.
Order materials online or contact us for specialist procurement support. We can help identify suitable rolled lead sheet, fixings, underlay and accessories based on the information provided for your project.
For direct online ordering, use the Lead Lads Shop flashing chart or browse the full rolled lead sheet range.
Get in Touch
The Lead Lads®
Specialist rolled lead sheet and leadwork supplies
Wakefield, West Yorkshire
United Kingdom
All rights reserved
Read practical guidance on lead codes, roll weights, flashing sizes, material pricing, BS EN 12588, installation principles and professional leadwork products.
The Lead Lads ® Lead Roof Guide Summer Maintenance Summer Lead Roof Maintenance Guide Summer [...]
Latest News The Lead Lads® Launch UK Franchise Model A controlled expansion designed to professionalise [...]
The Lead Lads ® Lead Roof Guide Spring Inspection Spring Lead Roof Inspections — How [...]
#Proper Leadwork: Lead Ventilation & Condensation—Warm vs Cold Roof Strategies Interstitial condensation is one of [...]
#Proper Leadwork: Edge-to-Edge Detailing—Ridges, Verges & Abutments without Stress Ridges and verges frame the roofline. [...]
#Proper Leadwork (2026): Upstands & Drips—Heights, Throatings & Edge Geometry Welcome to the New Year [...]
#Proper Leadwork: Lead Soakers—Sizing, Gauges & Interfaces with Slate and Tile Discreet but essential, lead [...]
#Proper Leadwork: Cornices, Cappings & Cills—Fixing to Masonry without Cracks Beautiful façades deserve durable lead [...]
